|
Worksheet |
|
| Type of Boat | |
| 1). Overall length of boom from front center of mast to 3" beyond end of sail. Note where boomvang, mainsheet, etc will interfere with fasteners placement (example: no hardware from 50" to 56" from front center of mast). (ft) |
Boom Length: |
| 2). Circumference around the mast including any halyards that you wish to cover. (inches) | Mast Circumstance |
| 3). Width of the head board (inches) | Head Board Width |
| 4). Height of the stack covering any winches/hardware on the mast, make note for any reinforcement needed for special hardware (inches) |
Stack Measurements |
| 5). ½ girth measured from front center of the mast to the throat of the sail, leave plenty of space for the sail stack. (inches) | Measurement: |
| 6). ½ girth measured from the throat of sail on a 45 degree angle to mast front center. (inches) | Measurement: |
| 7). ½ girth measurement at ¼ measurement of "#1" (inches) | Measurement: |
| 8). ½ girth measurement at ½ measurement of "#1". (inches) | Measurement: |
| 9). ½ girth measurement at largest point of clew patch (inches) | Measurement: |
|
|
|